Description

WiFi ITC-308 Temperature Controller WiFi IHC-200 Humidity Controller WiFi ITC-308 Temperature Controller Inkbird Digital ITC-308 WIFI Temperature Controller Heating and Cooling Outlets monitor the real-time temps, check the history data and change the parameters, all work on the app Main features Plug and play design, easy to use Dual relay output, be able to connect with refrigeration and heating equipment at the same time Support reading with Centigrade or Fahrenheit unit Maximum output load: 1100W(110V)/ 2300W(230V) Dual display window, be able to display measured temperature and set temperature at the same time Temperature calibration funcition Compressor delay protection for refrigeration control High and low temperature limit alarm can be set up Probe abnormal alarm WiFi Smart APP WiFi App Control Heating and Cooling Outlets Alarms at High / Low Temps Celsius (℃) or Fahrenheit (℉) Power: Voltage: 100~240Vac，50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac). Type of temperature probe: R25℃=100KΩ±1%, R0℃=26.74~27.83KΩ,B25/85℃=3435K±1% Temperature measurement range:-40℃~100℃/-40℉~212℉ Temperature display accuracy: 0.1℃ /℉(<100℃/℉), 1℃/℉(>=100℃/℉) WiFi IHC-200 Humidity Controller If you want to maintain the humidity from 47% to 55% Set "HS" (Target Humidity) as 50. Switch on the power Press the "SET" button for 3 seconds to "HS" humidity setting Press the up or down button to adjust the humidity to 50% Set "HD" (Humidification Differential Value) as 3. Press the "SET" button to select "HD" Press the up and down button to adjust the humidity to 3% Set "DD" (Dehumidification Differential Value) as 5. Press the "SET" button to select "DD" Press the up and down button to adjust the humidity to 5% How to connect the IHC-200 WiFi with APP (INKBIRD)? Specification: Power Input : 100 ~240VAC, 50Hz/60Hz Power Output : Max. 10A, 100V ~240V AC Humidity Measuring Range : 5%-99.99%RH Humidity Control Range : 5%-99%RH Resolution : 1%RH Accuracy : ±3%RH Input Power Cable Length : 1.5m (5ft) Output Power Cable Length : 30cm (1ft) Dimension : Body: 140x68x33mm (5.5x2.7x1.3inch) Socket : 85x42x24mm(3.3x1.7x1inch) Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F Storage: Temperature : -30~ 75 ° C / -22~ 167 ° F ; Humidity 20~85% (No Condensate) Package content 1 x WiFi Temperature Controller 1 x WiFi Humidity Controller 1 x User Manual WiFi ITC-308 Temperature Controller WiFi IHC-200 Humidity Controller WiFi ITC-308 Temperature Controller Inkbird Digital ITC-308 WIFI Temperature Controller Heating and Cooling Outlets monitor the real-time temps, check the history data and change the parameters, all work on the app Main features Plug and play design, easy to use Dual relay output, be able to connect with refrigeration and heating equipment at the same time Support reading with Centigrade or Fahrenheit unit Maximum output load: 1100W(110V)/ 2300W(230V) Dual display window, be able to display measured temperature and set temperature at the same time Temperature calibration funcition Compressor delay protection for refrigeration control High and low temperature limit alarm can be set up Probe abnormal alarm WiFi Smart APP WiFi App Control Heating and Cooling Outlets Alarms at High / Low Temps Celsius (℃) or Fahrenheit (℉) Power: Voltage: 100~240Vac，50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac). Type of temperature probe: R25℃=100KΩ±1%, R0℃=26.74~27.83KΩ,B25/85℃=3435K±1% Temperature measurement range:-40℃~100℃/-40℉~212℉ Temperature display accuracy: 0.1℃ /℉(<100℃/℉), 1℃/℉(>=100℃/℉) WiFi IHC-200 Humidity Controller If you want to maintain the humidity from 47% to 55% Set "HS" (Target Humidity) as 50. Switch on the power Press the "SET" button for 3 seconds to "HS" humidity setting Press the up or down button to adjust the humidity to 50% Set "HD" (Humidification Differential Value) as 3. Press the "SET" button to select "HD" Press the up and down button to adjust the humidity to 3% Set "DD" (Dehumidification Differential Value) as 5. Press the "SET" button to select "DD" Press the up and down button to adjust the humidity to 5% How to connect the IHC-200 WiFi with APP (INKBIRD)? Specification: Power Input : 100 ~240VAC, 50Hz/60Hz Power Output : Max. 10A, 100V ~240V AC Humidity Measuring Range : 5%-99.99%RH Humidity Control Range : 5%-99%RH Resolution : 1%RH Accuracy : ±3%RH Input Power Cable Length : 1.5m (5ft) Output Power Cable Length : 30cm (1ft) Dimension : Body: 140x68x33mm (5.5x2.7x1.3inch) Socket : 85x42x24mm(3.3x1.7x1inch) Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F Storage: Temperature : -30~ 75 ° C / -22~ 167 ° F ; Humidity 20~85% (No Condensate) Package content 1 x WiFi Temperature Controller 1 x WiFi Humidity Controller 1 x User Manual