Description

Home Payment Shipping About us Contact us Store Categories Store Categories Business, Office & Industrial Home, Furniture & DIY Computers/Tablets & Networking Sound & Vision Consumer Electronics Other Details Feature: ZL-7918A is an intelligent temperature and humidity controller, safe and stable, convenient to operate, applicable for control of incubator, climate chamber, warehouse, and so on. Specification: Power supply: 100 ~ 240V AC, 50/60Hz. One temperature sensor (L = 2.0 meter), one humidity sensor (L = 2.0 meter). Setting range: Humidity 10 ~ 80% RH. Temperature 1 ~ 65℃ Display range: Humidity 0 ~ 99% RH. Temperature -9.9 ~ 99℃. Measuring accuracy: Humidity ±3%@25℃. Temperature ±1%@25℃. Output control: 7 outputs (main-heater, aux-heater, lamp, humidity, egg-right-turning, egg-left-turning, fan). Output load: heater ≤ 1500W. Lamp ≤ 100W. Humidity, egg-turning and fan ≤ 1A/250Vac Hatched day counter: the maximum value is 99 days. Egg turn control: Turn period: 1 ~ 999 minutes. Turn driving time: 0 ~ 999 seconds. Turn times counter: 0 ~ 999 times. Air exhaustion control: Period: 1 ~ 999 minutes. Exhausting time: 0 ~ 999 seconds. Lamp control: Period: 1 ~ 999 minutes. Illuminating time: 0 ~ 999 seconds. Operation environment: -10 ~ 45℃, less than 90% RH without dew. Device dimension: 160 * 80 * 95 mm. Installation drilling size: 151.5 * 76.5 mm Wiring Diagram： Attention： The device is shipped with factory default setting. It suits for normal hatching requirements. It is even able to use directly without any setting for other parameters. About factory default setting, see the tables above. If need to set new temperature and humidity, please operate according to paragraph “Set temperature and humidity set-point ”. The Temperature and humidity control parameters will be generated automatically and accordingly. If you try to set the Temperature and humidity control parameters , please set them based on understanding to avoid hatching failure. Humidity sensor will not work correctly when covered with dust, water or dew. Please keep it clean and dry. The sensor is suitable to working within 20% to 80%RH. Before clean sensor, be sure there is no static electricity in hands! Manufacturer is responsible for the device itself, is not responsible to losses resulted by the failure of this device. Package Included: 1PCS*AC100～240V Intelligent Temperature and Humidity Incubation Controller Shipping Policy Payment Method Returns Policy Shipping Policy Payment Method Returns Policy Home Payment Shipping About us Contact us Copyright©2018 datacaciques Top & Fast Shipping！ Get The Right At The Right Price！ AC100V-240V Intelligent Incubator Temperature Humidity Controller Sensor 50/60Hz DESCRIPTION Feature: ZL-7918A is an intelligent temperature and humidity controller, safe and stable, convenient to operate, applicable for control of incubator, climate chamber, warehouse, and so on. Specification: Power supply: 100 ~ 240V AC, 50/60Hz. One temperature sensor (L = 2.0 meter), one humidity sensor (L = 2.0 meter). Setting range: Humidity 10 ~ 80% RH. Temperature 1 ~ 65℃ Display range: Humidity 0 ~ 99% RH. Temperature -9.9 ~ 99℃. Measuring accuracy: Humidity ±3%@25℃. Temperature ±1%@25℃. Output control: 7 outputs (main-heater, aux-heater, lamp, humidity, egg-right-turning, egg-left-turning, fan). Output load: heater ≤ 1500W. Lamp ≤ 100W. Humidity, egg-turning and fan ≤ 1A/250Vac Hatched day counter: the maximum value is 99 days. Egg turn control: Turn period: 1 ~ 999 minutes. Turn driving time: 0 ~ 999 seconds. Turn times counter: 0 ~ 999 times. Air exhaustion control: Period: 1 ~ 999 minutes. Exhausting time: 0 ~ 999 seconds. Lamp control: Period: 1 ~ 999 minutes. Illuminating time: 0 ~ 999 seconds. Operation environment: -10 ~ 45℃, less than 90% RH without dew. Device dimension: 160 * 80 * 95 mm. Installation drilling size: 151.5 * 76.5 mm Wiring Diagram： Attention： The device is shipped with factory default setting. It suits for normal hatching requirements. It is even able to use directly without any setting for other parameters. About factory default setting, see the tables above. If need to set new temperature and humidity, please operate according to paragraph “Set temperature and humidity set-point ”. The Temperature and humidity control parameters will be generated automatically and accordingly. If you try to set the Temperature and humidity control parameters , please set them based on understanding to avoid hatching failure. Humidity sensor will not work correctly when covered with dust, water or dew. Please keep it clean and dry. The sensor is suitable to working within 20% to 80%RH. Before clean sensor, be sure there is no static electricity in hands! Manufacturer is responsible for the device itself, is not responsible to losses resulted by the failure of this device. Package Included: 1PCS*AC100～240V Intelligent Temperature and Humidity Incubation Controller SHIPPING Please Make sure your Ebay Address is 100% right. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. PAYMENT Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order. RETURN Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner. ---------------------------------------------©Copyright Gogaviinse. All Rights Reserved.--------------------------------------